Chat with us
  1. aytm Help Center
  2. Research Tests
  3. Shelf Test

Articles in this section

When using a Shelf Test, you may have a specific order you wish for items to appear in. Using Shelf Logic, you can organize products on your shelves intentionally, or according to your planogram, regardless of the order products were programmed into the Shelf Test Question.

 

 

1. Shelf Logic alignment commands

There are five commands to align your products on the shelves: shelf, shelf-left, shelf-right, shelf-center, and shelf-flex. Shelf (the default command) will automatically center products on the shelf, as will shelf-center. Accordingly, shelf-left will left justify products, and shelf-right will Right justify products. Shelf-flex will add spacing between products.

Note: At this time, only one shelf command may be used per Shelf Test question.

shelf_commands.png

 

 

2. Programming Shelf Logic

  1. Type a [ followed by your shelf alignment command.
  2. Type { to indicate the beginning of a new shelf, followed by the Product Numbers you would like to appear on that shelf.
  3. Type } to indicate the end of a shelf. Follow with a comma and an open { to continue creating additional shelves, or a ] to indicate the end of the logic chain.
    Note: To avoid errors, the number of shelves used in your logic must match the number of shelves selected in the drop-down menu below your question.
9D57EA31-1BC1-40FF-B199-3EB1F9A4C0CC.GIF

 

 

3. Multiple Facings

If you want a product to appear more than once on a shelf, you must also type the corresponding answer/product number more than once.

Note: Because Shelf Logic overrides the Product Card, even if you indicated multiple facings in the Product Card, you must specify where those facings show up on the shelf in the logic chain.

facings_1.png

 

 

4. Club Store Logic

When programming shelf logic for Club stores, the order of your shelves (as designated by {braces}) moves left to right along the top row, then left to right along the middle row (if applicable), and then left to right along the bottom row. 

  • If you select 1 Pallet + display shelf, you must program products into 2 braces (display shelves display automatically, regardless of logic).
  • If you select 1 Pallet + 1 shelf, you must program 4 braces.
    If you select 1 Pallet + 2 shelves, you must program 6 braces.
  • If you select 2 Pallets + display shelf, you must program 4 braces (display shelves automatically display, regardless of logic).
  • If you select 2 Pallet + 1 shelf, you must program products into 8 braces.
  • If you select 2 Pallet + 2 shelves, you must program products into 12 braces.
Snag_3ea114.png

 

 

5. Possible errors

If an error occurs, check the consistency for these three items:

  • Shelf Numbers—Number of shelves selected does not match the number of shelves typed in braces in your logic.

  • Actual Spacing—Product Editor keeps track of how large your items are, and if there is enough room for them on a standard store shelf. If you put so many items on a shelf that they would not physically fit onto the shelf in real life, it will result in an error.

  • Missing products—i.e. There are 20 products in your “answer” but only 19 written in the Shelf Logic.